Images may not represent actual product and finish

Thumbnail

Hafele 003.15.041

Your Price: $11.60

Retail Price:$15.47

Your Savings:$3.87(25%)

Titebond, Melamine Glue, 16 oz.

Part Number: HAF_00315041

Availability: Available

Quantity

Description
Literature

Hafele 003.15.041 Titebond

BOND STRENGTH ASTM D-905 (On Hard Maple) Substrates Strength psi % wood failure Melamine/Melamine Lap Shears 329 100 Melamine/Particle Board 329 100
APPLICATION GUIDELINES Application temperature: Above 40°F. Open assembly time: 5 minutes (70°/50% RH) Total assembly time: 10-15 minutes (70°F/50% RH) Minimum required spread: Approximately 6 mils or 250 square feet per gallon Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods ands and 175-250 psi for hardwoods) Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. LIMITATIONS Not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Vacuum pressing should only be used for veneers up to 1/16" in thickness. Do not use when temperature, glue or materials are below 40°F. If product has been frozen (gel-like appearance), it cannot be used. Read MSDS before use. NOTE: KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN
Bonds melamine and vinyl coated products to porous materials
Dries clear
Low odor–nonflammable
Thicker formulation–fewer runs and drips
APPLICATION GUIDELINES Application temperature: Above 40°F. Open assembly time: 5 minutes (70°/50% RH) Total assembly time: 10-15 minutes (70°F/50% RH) Minimum required spread: Approximately 6 mils or 250 square feet per gallon Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods ands and 175-250 psi for hardwoods) Methods of application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. LIMITATIONS Not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Vacuum pressing should only be used for veneers up to 1/16" in thickness. Do not use when temperature, glue or materials are below 40°F. If product has been frozen (gel-like appearance), it cannot be used. Read MSDS before use. NOTE: KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN Substrates Strength psi % wood failure Melamine/Melamine Lap Shears 329 100 Melamine/Particle Board 329 100

Attributes

Ship via: Can Ship UPS

Capacity: (16 oz.) .47 l

Resources

Titebond Melamine Specifications

LAB 273B-V4 .273 Bottom Pin, Color-coded, Brass Alloy, .115 Diameter, Crown .003 Universal, Vial 150 Pins

$3.45

Available

Add To Cart

LAB 360B-V4 .360 Bottom Pin, Color-coded, Brass Alloy, .115 Diameter, Crown .003/.005 Universal, Vial 150 Pins

$3.45

Available

Add To Cart

LAB 5125B-V4 .125 Bottom Pin, Color-coded, Brass Alloy, .115 Diameter, Crown .005 Universal, Vial 150 Pins

$3.45

Available

Add To Cart

CRL FR3143-3/8" 3140 Non-Tilt Spiral Balance with FS343 Clip Attached

$18.53

Available

Add To Cart

CRL CAVH1SB Satin Brass 78" Replacement Header Bar for Cavoli Sliding Shower Door System

$244.58

Available

Add To Cart

Schlage L283199 Pair of L Series Spindles and Springs for 2" to 3-1/2" Door

$26.32

Available

Add To Cart

Hafele 003.15.041

Related Items

Recently Viewed Items